St. Cloud State University
HuskyNet Wired Access Instructions
Contacts
HelpDesk: helpdesk@stcloudstate.edu
resources
Windows XP
Requirements
- Have a valid HuskyNetID and password
- Windows XP Service Pack 2
- For wireless: Have a built-in or installed wireless
adapter in your computer.
Note: Although most should work, we cannot guarantee compatibility with all wireless adapters.
Configuration Instructions
Follow these instructions to configure your computer on ResNet with an Ethernet cable.
In most cases, your computer will already be properly configured to work on ResNet. To test this, connect your computer to the data-jack in your room with an Ethernet cable. Then turn on your computer and open a web browser. If you see the Computer Registration page, you can skip the configuration steps below.
- Go to the Start Menu and select Control Panel.
- In the Control Panel click on Network and Internet Connections and then on the Network Connections icon.
- In the Network Connections window you should see an
icon called Local Area Connection. Right-click on it and
select Properties.
- In the Local Area Connection Properties window, select
(do not uncheck) Internet Protocol (TCP/IP) and click
on the Properties button.
- In the Internet Protocol (TCP/IP) Properties window,
make sure Obtain an IP address automatically and Obtain
DNS server address automatically are both selected. Click OK in
any remaining open windows.
Registration
Before you can use the Internet, you must register you computer on the campus network. To do this, open a web browser (Internet Explorer, Firefox, Safari, etc.) and follow the on screen instructions. You will need your HuskyNetID and password for this process.
Site Map | Map & Directions | Contact SCSU | Accreditations
St. Cloud State University is an affirmative action/equal opportunity educator and employer.
St. Cloud State University is a member of the Minnesota State Colleges and Universities system.
